Vehicle Jerks During
The vehicle jerks when VDC function, TCS function, ABS function, EBD function, brake assist function or hill start assist function operates.
CHECK SYMPTOM
Check that the vehicle jerks when VDC function, TCS function, ABS function, EBD function, brake assist function or hill start assist function operates.
Is the inspection result normal?
YES>>Normal
NO>>GO TO 2.
PERFORM THE SELF DIAGNOSTIC RESULT
CONSULT
Ignition switch OFF → ON.
Repeat step 1 two or more times.
Select “Self Diagnostic Result” mode of “ABS”.
Is any DTC detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>GO TO 3.
CHECK CONNECTOR
Ignition switch OFF.
Disconnect ABS actuator and electric unit (control unit) harness connector.
Check connector terminal for deformation, disconnection and looseness.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Poor connection of connector terminal. Repair or replace connector terminal.
PERFORM THE SELF DIAGNOSTIC RESULT
CONSULT
Connect harness connector.
Ignition switch OFF → ON.
Repeat step 2 two or more times.
Select “Self Diagnostic Result” mode of “ABS”.
Is any DTC detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>GO TO 5.
PERFORM THE SELF DIAGNOSTIC RESULT
CONSULT
Select “Self Diagnostic Result” mode of “ENGINE” and “TRANSMISSION”.
Is any DTC detected?
YES>>Check the DTC.
NO>>Replace ABS actuator and electric unit (control unit). Refer to Removal and Installation.