Driver Controls

Wiper and Washer System Symptoms

~4min read
Symptom Table
SymptomProbable malfunction locationInspection item
Front wiper does not operate in . . . HI only
  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
  • IPDM E/R

  • Harness between IPDM E/R and front wiper motor

  • Front wiper motor

Front wiper motor (HI) circuit

Refer to Component Function Check.

Front wiper request signal

  • BCM

  • IPDM E/R

BCM(WIPER) “Data Monitor”

“FR WIPER HI”

Refer to Diagnosis Description.
LO only
  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
  • IPDM E/R

  • Harness between IPDM E/R and front wiper motor

  • Front wiper motor

Front wiper motor (LO) circuit

Refer to Component Function Check.

Front wiper request signal

  • BCM

  • IPDM E/R

BCM(WIPER) “Data Monitor”

“FR WIPER LOW”

Refer to Diagnosis Description.
INT only
  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
HI, LO and INT

SYMPTOM DIAGNOSIS

“FRONT WIPER DOES NOT OPERATE”

Refer to Diagnosis Procedure.
Front wiper does not stop in . . . HI only
  • Combination switch (wiper and washer switch)

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.

Front wiper request signal

  • BCM

  • IPDM E/R

BCM(WIPER) “Data Monitor”

“FR WIPER HI”

Refer to Diagnosis Description.
IPDM E/R —
LO only
  • Combination switch (wiper and washer switch)

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.

Front wiper request signal

  • BCM

  • IPDM E/R

BCM(WIPER) “Data Monitor”

“FR WIPER LOW”

Refer to Diagnosis Description.
IPDM E/R —
INT only
  • Combination switch (wiper and washer switch)

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
Front wiper does not operate normally in. . . Sensitivity adjustment cannot be performed.
  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
BCM —
Wiper is not linked to the washer operation.
  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
BCM —
Does not return to stop position. [Repeatedly operates for 10 seconds and then stops for 20 seconds. (Fail-safe)]
  • IPDM E/R

  • Harness between IPDM E/R and front wiper motor

  • Front wiper motor

Front wiper stop position signal circuit

Refer to Component Function Check.
Rear wiper does not operate in. . . ON only
  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
INT only
  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
ON and INT
  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
  • BCM

  • Harness between rear wiper motor and BCM

  • Harness between rear wiper motor and ground

  • Rear wiper motor

Rear wiper motor circuit

Refer to Component Function Check.
Rear wiper does not stop in. . . ON only
  • Combination switch (wiper and washer switch)

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
INT only
  • Combination switch (wiper and washer switch)

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
Rear wiper does not operate normally in. . . Wiper is not linked to the washer operation.
  • Combination switch (wiper and washer switch)

  • Harness between rear wiper motor and BCM

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
BCM —
Rear wiper does not return to the stop position. [Stops after a five-second operation. (Fail-safe)]
  • BCM

  • Harness between rear wiper motor and BCM

  • Rear wiper motor

Rear wiper stop position signal circuit

Refer to Component Function Check.
Front and rear washer motor does not operate. Front and rear washer motor does not operate when washing the windshield.
  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
  • Harness between combination switch (wiper and washer switch) and front and rear washer motor

  • Front and rear washer motor

Front and rear washer motor circuit

Refer to Diagnosis Procedure.