Side turn signal lights, Number plate light., Interior lights

Side turn signal lights

Have bulbs replaced by a workshop.

Number plate light.

Number plate light

1. Insert screwdriver in bulb housing, press to the side and release spring.

2. Remove bulb housing downwards, taking care not to pull on the cable.

3. Lift flap and disconnect wiring plug from bulb holder.

4. Rotate bulb holder anti-clockwise to disengage. 5. Remove bulb from holder and renew bulb. 6. Insert bulb holder in bulb housing and rotate clockwise. 7. Connect wiring plug to bulb holder.

8. Insert and engage bulb housing.

Interior lights

Front courtesy light 1. Disengage and remove lens at the position located in the illustration using a screwdriver. 2. Remove bulb from socket. 3. Insert new bulb.

4. Mount lens and engage in position.

Front courtesy light, reading lights 1. Disengage lens, press it downward slightly and remove at a downward angle. 2. Remove bulb and renew.

3. Engage lens.

Rear courtesy light and reading lights

Have bulbs replaced by a workshop.

Glovebox light, foot well light

1. Prise the lamp out with a screwdriver.

2. Press bulb slightly towards spring clip and remove. 3. Insert new bulb.

4. Install lamp.