Storage compartment cover in the rear floor

Sliding floor cover (FlexFloor)

To allow convenient loading of the luggage compartment, the floor cover can be extended.

Extending the floor cover

• Lift the floor slightly by the handle until the spring rollers disengage on each side.

• Press the button under the handle and pull the floor cover until it engages.

Load the floor in this position.

Retracting the cover in the luggage compartment

• Press the button under the handle and slide the floor cover until it engages in the end position.

Keep the floor cover in the raised position while it is loaded.

To return the floor cover to its original position after unloading

• Lift the floor slightly by the handle and press the spring rollers on each side manually. Both spring rollers must click into position.
• Lower the floor cover.

The extended floor cover can be loaded with a maximum of 120 kg, as confirmed by a warning label on the floor cover.

Secure objects with tie-down straps attached to the tie-down eyelets 71. See Loading information 78.

Caution

Do not load or unload the luggage compartment using the sliding floor cover when the vehicle is parked on a slope. The floor cover could move uncontrollably to the end positions.

Raise or lower the floor cover only when it is not loaded.

Risk of injury.

To access the spare wheel or tire repair kit, lift the floor cover and secure the retaining strap to the upper edge of the tailgate recess.

Raise and secure the cover only when it is not loaded.