Vehicle storage

Long-term storage

If the vehicle is to be stored for several months:

• Wash and wax the vehicle.
• Have the wax protection in the engine compartment and on the underbody checked.
• Clean and protect the rubber seals.
• Fill the fuel tank.
• Replace the engine oil.
• Empty the washer fluid reservoir.
• Check the antifreeze and corrosion protection of the coolant.
• Set the tire pressure to the value for full load.
• Park the vehicle in a dry, well-ventilated room. Engage 1st or reverse gear, or place the selector lever in P. Prevent the vehicle from moving by using wheel chocks.
• Do not apply the parking brake.
• Open the hood, close all doors and lock the vehicle.
• Disconnect the negative battery terminal clamp from the vehicle battery.

Keep in mind that none of the systems will function (for example, the anti-theft alarm).

Returning to service

When the vehicle is returned to service:

• Reconnect the negative battery terminal. Activate the power window electronics.
• Check the tire pressure.
• Fill the washer fluid reservoir.
• Check the engine oil level.
• Check the coolant level.
• If applicable, reinstall the license plate.