Comfort
Front Seats
In this manual: Comfort
~2min read
The seat consists of a seat cushion, a backrest and an adjustable head restraint, allowing the position to be adapted to driving conditions and the comfort of the occupant.
1. Longitudinal adjustment

- Lift the lever and slide the seat forwards or backwards.
2. Driver's or passenger's seat height adjustment

- Pull the lever up or push it down as many times as necessary to reach the desired position.
3. Backrest angle adjustment

Move the lever backwards.
4. Access to rear seats (3-door version)

- Pull the lever to fold the backrest and slide the seat forward. Once positioned, the seat returns to its initial position.
Take care not to trap the seat belts, which could obstruct passengers getting into the rear seats.
5. Head restraint height adjustment

- To raise the head restraint, pull it upwards.
- To remove the head restraint, press tab A and pull upwards.
- To refit the head restraint, insert the posts into the holes along the axis of the backrest.
- To lower the head restraint, press tab A and press the head restraint at the same time.
Never drive with the head restraints removed; they must be in place and correctly adjusted.
6. Armrests (except 3-door version)

They can be folded and removed.
- To fold the armrest, press the button located between the armrest and the seat and pull the armrest.
7. Heated seats switch
With the engine running, the front seats can be heated independently.
- Using the knob located on the side of each seat, heating can be switched on and set: 0: Off. 1: Low. 2: Medium.
3: High.

The operating mode of the heating or heated front seats is stored in the computer for approx. 2 minutes after the ignition is switched off.
Test yourself
A quick Peugeot 207 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?