Side protection mouldings

REMOVING THE FRONT DOOR TRIM STRIP

Remove the screw (A).

Pull the trim strip towards the rear of the vehicle (1).

CAUTION: the indexing clips (B) cannot be removed without being damaged; they must be replaced systematically whenever they are removed (e.g. when straightening a panel).

Release the two clips (C), then remove the monogram.

REMOVING THE REAR DOOR TRIM STRIP

Pull the trim strip towards the front of the vehicle (2).

Remove the clips as shown above.

SPECIFICS FOR REFITTING THE FRONT AND REAR DOOR TRIM STRIPS

Position the clips on the trim strip, then clip it onto the door.

NOTE: only the indexing clips may be left on the panel when refitting the trim strips.