Trolley jack - Axle stands
Safety symbol (special precautions to observe during work).

Using a trolley jack always requires the use of suitable axle stands.
Do not lift the vehicle by supporting it under the front suspension arms or under the V-profile of the rear axle.
Depending on the type of trolley jack, use sockets Cha. 408-01 or Cha. 408-02 to place pad Cha. 280-02.
To lift the front or rear, support the vehicle under the lifting points of the on-board jack.
SIDE TROLLEY JACK
Use pad Cha. 280-02.
Support the vehicle under the wheel arch lip at the front door.
Position the sill flange correctly in the groove of the pad.

AXLE STANDS
When placing the vehicle on axle stands, always position them:
- either under the reinforcements provided for lifting the vehicle with the on-board jack,
- or under the pads located behind the reinforcements.
Rear axle stands are positioned by lifting the vehicle from the side.

Test yourself
A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.