Renault Megane Quiz
Trim and upholstery

Backrest frame

In this manual: Trim and upholstery
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

Tightening torques
Retractor fixing screw 25 N.m
Backrest lock mechanism fixing screws 18 N.m
Backrest frame fixing lug screw 35 N.m
Armrest fixing screw - backrest frame 18 N.m

REMOVAL

Remove the backrest trim (see chapter 78A-A).

Armature de dossier

Remove the armrest support screws (A).

Armature de dossier

Remove the backrest locking mechanism screws (B).

Release the backrest locking mechanism.

Armature de dossier

Remove the screws (C).

Release the webbing cover.

Armature de dossier

Release the trim (D).

Remove the screw (E).

Release the retractor.

INSTALLATION

Use tool Car. 1558 (blue) for the cover zip (see chapter 78A-A).

Refit in the reverse order of removal.

Tighten to torque.

Adapting the replacement part when replacing a backrest frame not fitted with the centre armrest:

  • the replacement frame is designed to take the armrest,
  • a cut is therefore required at the armrest support lug (see below).
Armature de dossier

Cut the lug along the marking (F).

Fold down the card trim retaining tab (G).

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.