Trim and upholstery
Full seat cushion 1/3-2/3
In this manual: Trim and upholstery
~1min read
REMOVAL
NOTE: The removal procedure is the same for the 1/3, 2/3 and 1/1 seat cushion.

Tilt the seat cushion and unclip it.

Insert a flat-blade screwdriver into the hole (A).

Apply pressure on the clip (B).
Release the retaining clip.
INSTALLATION
Check that the retaining clips are in good condition before refitting the seat cushion.
Refit in the reverse order of removal.
Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?