Fastener removal and installation

1. 1
   Depress the head of fastener center piece (1).
2. 2
   Pull out the fastener (2).

   

1. Let the center piece stick out toward the head so that the pawls “a” closes.

2. Insert the fastener into the installation hole.

to prevent the pawl “a” from damage, insert the fastener all the way into the installation hole.

3. Push in the head of center piece until it becomes flush with the fastener outside face.

1. 1
   Pry up the head of fastener center piece (1) with a screw driver.
2. 2
   Pull out the fastener “a”.

   

1. Insert the fastener into the installation hole.

to prevent the pawl (1) from damage, insert the fastener all the way into the installation hole.

2. Push in the head of center piece.