How To Proceed With Troubleshooting

HINT:

• Use the following procedure to troubleshoot the front power seat control system.
• *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT

1. INSPECT BATTERY VOLTAGE

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT

1. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

(a) Use the Techstream to check if the CAN communication system is functioning normally (See page ).

B

GO TO CAN COMMUNICATION SYSTEM

A

1. CHECK DTC OUTPUT*

(a) Check for DTCs (See page ).

(b) Clear the DTCs (See page ).

(c) Recheck for DTCs (See page ).

B

GO TO STEP 7

A

1. PROBLEM SYMPTOMS TABLE

(a) Refer to Problem Symptoms Table (See page
).

B

GO TO STEP 7

A

1. OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Operation Check (See page )

(b) Data List / Active Test (See page )

(c) Terminals of ECU (See page )

NEXT

1. REPAIR OR REPLACE

NEXT

1. CONFIRMATION TEST

NEXT

END