Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (See page ).

1. INSTALL POWER STEERING ECU ASSEMBLY

(a) Attach the 2 claws to install the power steering ECU assembly.

2. INSTALL ECU INTEGRATION BOX RH

3. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY

4. INSTALL INSTRUMENT LOWER PANEL SUB-ASSEMBLY

5. INSTALL INSTRUMENT PANEL BOX DOOR COVER

6. INSTALL INSTRUMENT NO. 2 LOWER PANEL AIRBAG ASSEMBLY

7. INSTALL INSTRUMENT LOWER COVER LH

8. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

9. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

10. INSTALL COWL SIDE TRIM BOARD RH

11. INSTALL DOOR SCUFF PLATE ASSEMBLY RH

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

13. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light (See page ).