Toyota 4Runner Quiz
Steering

Removal

In this manual: Steering
General — 25Audio / Visual / Telematics — 283Brake — 187Drivetrain — 204Power Source / Network — 79Steering — 76Suspension — 130Vehicle Exterior — 391Vehicle Interior — 693
~1min read
REMOVAL PROCEDURE

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).


2. REMOVE DOOR SCUFF PLATE ASSEMBLY RH


3. REMOVE COWL SIDE TRIM BOARD RH


4. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH


5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


6. REMOVE INSTRUMENT LOWER COVER LH


7. REMOVE INSTRUMENT NO. 2 LOWER PANEL AIRBAG ASSEMBLY


8. REMOVE INSTRUMENT PANEL BOX DOOR COVER


9. REMOVE INSTRUMENT LOWER PANEL SUB-ASSEMBLY


10. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY


11. REMOVE ECU INTEGRATION BOX RH


12. REMOVE POWER STEERING ECU ASSEMBLY

(a) Using a screwdriver, detach the 2 claws and remove the power steering ECU assembly.

HINT:

Tape the screwdriver tip before use.

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.