Installation

1. INSTALL REFRESHING SEAT SWITCH

(a) Attach the 4 claws to install the refreshing seat switch.

2. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

3. INSTALL NO. 2 CONSOLE BOX RETAINER

4. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for VF2A)

7. INSTALL HEATER CONTROL ASSEMBLY

8. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

9. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

Torque:

5,4 N·m {55 kgf·cm, 48 in·lbf}

11. CHECK SRS WARNING LIGHT

(See page )