Installation

INSTALLATION CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

1. INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

NOTICE:

When installing the retractor, make sure the claws of the vehicle (labeled "a" in the illustration) only contact the installation areas of the retractor.

(a) Align the claws with the seat belt positioning holes and install the retractor of the seat belt with the nut and bolt as shown in the illustration.

HINT:

First install the bolt, and then install the nut.

Torque:

for bolt :

7,5 N·m {76 kgf·cm, 66 in·lbf}

for nut :

42 N·m {428 kgf·cm, 31 ft·lbf}

Text in Illustration

*1	Bolt
*2	Nut

2. INSTALL REAR SEAT SHOULDER BELT GUIDE

3. INSTALL REAR SEATBACK EDGE PROTECTOR

4. INSTALL SEATBACK COVER WITH PAD

5. INSTALL REAR SEAT LOCK STRIKER

6. INSTALL REAR SEATBACK LOCK STRIKER PROTECTOR

7. INSTALL REAR SEAT SHOULDER BELT COVER

8. INSTALL SEAT BELT ANCHOR COVER CAP

9. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

10. INSTALL REAR SEATBACK STOP BUTTON GROMMET

11. INSTALL REAR SEATBACK LOCK ASSEMBLY RH

12. INSTALL REAR SEATBACK LOCK COVER RH

13. INSTALL CENTER NO. 2 SEATBACK COVER

14. INSTALL CENTER SEATBACK ASSEMBLY

15. INSTALL CENTER SEATBACK COVER SUB-ASSEMBLY

16. INSTALL REAR SEAT CENTER INNER BELT ASSEMBLY

17. INSTALL REAR SEAT INNER RECLINING COVER RH

18. INSTALL NO. 1 SEATBACK BOARD SUB-ASSEMBLY (for Plastic Seatback Board)

19. INSTALL NO. 1 SEATBACK BOARD SUB-ASSEMBLY (for Seatback Board with Carpet)

20. INSTALL REAR SEAT ASSEMBLY RH

(a) Install the rear No. 2 seat assembly RH (See page ).