Brake
Reassembly
In this manual: Brake
~1min read
REASSEMBLY PROCEDURE
1. INSTALL MASTER CYLINDER RESERVOIR GROMMET
(a) Apply a light coat of lithium soap base glycol grease to 2 new master cylinder reservoir grommets.
(b) Install the 2 master cylinder reservoir grommets to the brake master cylinder reservoir assembly.
2. INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY
(a) Install the brake master cylinder reservoir assembly to the brake master cylinder body.
(b) Using a pin punch and hammer, install a new pin to the brake master cylinder reservoir assembly.
3. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER
4. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
5. INSTALL BRAKE FLUID INFORMATION LABEL
Test yourself
A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?