Toyota 4Runner Quiz
Brake

Installation

In this manual: Brake
General — 25Audio / Visual / Telematics — 283Brake — 187Drivetrain — 204Power Source / Network — 79Steering — 76Suspension — 130Vehicle Exterior — 391Vehicle Interior — 693
~1min read
010203040501310N·mlb·ft
Tightening torque found on this page
INSTALLATION CAUTION / NOTICE / HINT PROCEDURE

1. INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY

(a) Install a new O-ring to the brake master cylinder sub-assembly.

(b) Install the brake master cylinder sub-assembly with 2 nuts.

Torque:

13 N·m {127 kgf·cm, 9 ft·lbf}

(c) Using a union nut wrench, connect the 2 brake lines to the brake master cylinder sub-assembly.

Text in Illustration

*a

Torque Wrench Fulcrum Length

Torque:

Specified tightening torque :

20 N·m {199 kgf·cm, 14 ft·lbf}

HINT:

  • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench (See page ).

  • When using a union nut wrench (fulcrum length of 20 mm (0.787 in.)) + torque wrench (fulcrum length of 162 mm (6.38 in.)):

    17 N*m (177 kgf*cm, 13 ft.*lbf)

(d) Attach the clamp and connect the connector.

2. BLEED BRAKE SYSTEM

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.