Removal

1. PRECAUTION

CAUTION:

Be sure to read Precaution thoroughly before servicing (See page ).

NOTICE:

• When removing the front seat assembly RH, perform zero point calibration and the sensitivity check (See page ).
• When replacing the occupant classification ECU, perform zero point calibration and the sensitivity check (See page ).

2. REMOVE FRONT SEAT ASSEMBLY RH

HINT:

Refer to the procedures up to Remove Front Seat Assembly (See page ).

3. REMOVE OCCUPANT CLASSIFICATION ECU

(a) Disconnect the 2 connectors.

(b) Using a screwdriver, detach the claw and remove the occupant classification ECU.

HINT:

Tape the screwdriver tip before use.