On-vehicle Inspection

CAUTION:

Be sure to follow the correct removal and installation procedures for the occupant classification ECU.

1. CHECK OCCUPANT CLASSIFICATION ECU (VEHICLE NOT INVOLVED IN COLLISION)

(a) Perform a diagnostic system check (See page ).

2. CHECK OCCUPANT CLASSIFICATION ECU (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)

(a) Perform a diagnostic system check (See page ).

(b) Visually check for the following defects of the occupant classification ECU:

• Cracks on the ECU housing
• Dents on the ECU housing
• Chips on the ECU housing
• Cracks or other damage to the connector
• Damage to the serial number

OK:

No defects are found.

HINT:

If any of the defects is found, replace the occupant classification ECU with a new one.

3. CHECK OCCUPANT CLASSIFICATION ECU (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS DEPLOYED)

(a) Perform a diagnostic system check (See page ).

(b) Visually check for the following defects of the occupant classification ECU:

• Cracks on the ECU housing
• Dents on the ECU housing
• Chips on the ECU housing
• Cracks or other damage to the connector
• Damage to the serial number

OK:

No defects are found.

HINT:

If any of the defects is found, replace the occupant classification ECU with a new one.