Vehicle Exterior
Sensor (Motor) Failure (B2341,B2344)
In this manual: Vehicle Exterior
~1min read
DESCRIPTION
PROCEDURE
Result
- When the sliding roof drive gear sub-assembly detects a motor malfunction and the sliding roof operation is stopped, DTC B2341 is stored.
- When the sliding roof drive gear sub-assembly detects a gear position malfunction and the sliding roof operation is stopped, DTC B2344 is stored.
DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
B2341 |
There is a sensor (motor) failure. |
Sliding roof drive gear sub-assembly (Sliding roof motor) |
B2344 |
There is a position failure. |
Sliding roof drive gear sub-assembly (Sliding roof ECU) |
CHECK FOR DTC
(a) Clear the DTCs (See page
).
(b) Check for DTCs (See page
).
Result
Result | Proceed to |
|---|---|
DTC B2341 or B2344 is output |
A |
DTC B2343 is output |
B |
DTC is not output |
C |
| A | ![]() | REPLACE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY |
| B | ![]() | GO TO B2343 |
| C | ![]() | USE SIMULATION METHOD TO CHECK |
Test yourself
A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
.gif)