Engine control system

Knock (2AZ−FE)

13steps
~78min
3/5difficulty
010203040502015N·mlb·ft
Tightening torque found on this page
Done 0 of 13
REPLACEMENT
  1. DRAIN ENGINE COOLANT
  2. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE
  3. REMOVE THROTTLE BODY ASSY
  4. REMOVE INTAKE MANIFOLD

a. Remove the 5 bolts, 2 nuts, intake manifold and gasket.

Remove intake manifold
Remove intake manifold
5. REMOVE KNOCK
  1. Disconnect the knock connector.

  2. Remove the nut and knock .

Remove knock
Remove knock
6. INSTALL KNOCK
  1. Install the knock with the nut.

    Torque: 20 N·m
  2. Connect the knock connector.

Install knock
Install knock
7. INSTALL INTAKE MANIFOLD

a. Install a new gasket and the intake manifold with the 5 bolts and 2 nuts.

Torque: 30 N·m Install intake manifold
Install intake manifold
  1. INSTALL THROTTLE BODY ASSY
  2. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE
  3. CHECK CONNECTION OF VACUUM HOSE
  4. ADD ENGINE COOLANT
  5. CHECK FOR ENGINE COOLANT LEAKS

Test yourself

A quick Toyota Camry quiz: every answer comes with an explanation and a link to the manual page.