Suspension

Front Shock Absorber

~1min read

Inspection

INSPECTION

PROCEDURE

1. INSPECT FRONT SHOCK ABSORBER ASSEMBLY

(a) Compress and extend the front shock absorber assembly rod 4 times or more.

Standard:

When compressed and extended at a constant speed, the stroke of the shock absorber rod is smooth with no abnormal resistance or sounds. When extended, the shock absorber rod returns to its original position at a constant speed with no abnormal sounds.

HINT:

If there are any abnormalities, replace the front shock absorber assembly with a new one.

Disposal

DISPOSAL

CAUTION:

  • Always use a cloth to prevent shards of metal from flying about due to the release of pressurized gas.
  • Always wear safety glasses.

HINT:

The gas is colorless, odorless and non-poisonous.

PROCEDURE

1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY

(a) Place the front shock absorber horizontally with the piston rod extended, and using a hacksaw, make a hole between (A) and (B) shown in the illustration to discharge the gas inside.