Vehicle Interior

How To Proceed With Troubleshooting

~3min read

HINT:

  • Use the following procedure to troubleshoot the occupant classification system.
  • *: Use the GTS.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

NEXT
  1. CUSTOMER PROBLEM ANALYSIS

(a) Confirm problem symptoms.

Click here

NEXT
  1. INSPECT AUXILIARY BATTERY VOLTAGE

(a) Measure the battery voltage with the ignition switch off.

Standard voltage:

11 to 14 V

HINT:

  • A simple method to determine whether the battery is discharged is to operate the horn.
  • If the voltage is below 11 V, recharge or replace the battery before proceeding.

(b) Check the fuses and relays.

(c) Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.

NEXT
  1. CHECK CAN COMMUNICATION SYSTEM*

(a) Using the GTS, check if the CAN communication system is functioning normally.

OK:

CAN communication system is functioning normally.

HINT:

  • Refer to Communication Bus Check in CAN Communication System.
    • for HEV Model:

      Click here

    • for Gasoline Model:

      Click here

  • The airbag ECU assembly is connected to the CAN communication system. Therefore, before starting troubleshooting, make sure to check that there are no malfunctions in the CAN communication system.
NG

GO TO CAN COMMUNICATION SYSTEM

for HEV Model: Click here

for Gasoline Model: Click here

OK
  1. CHECK PASSENGER AIRBAG ON/OFF INDICATOR

(a) Refer to Operation Check.

Click here

NEXT
  1. CHECK DTC*

(a) Check for DTCs.

Body Electrical > SRS Airbag > Trouble Codes

HINT:

Record or print DTCs if necessary.

Result

Proceed to

No DTCs are output

A

Airbag system DTCs are output

B

Occupant classification system DTCs are output

C

A

GO TO PROBLEM SYMPTOMS TABLE

B

GO TO AIRBAG SYSTEM

C
  1. CLEAR DTC*

NOTICE:

Make sure to record any output Freeze Frame Data and Vehicle Control History (RoB) codes before clearing them and checking the DTC again.

(a) Clear the DTCs.

Body Electrical > SRS Airbag > Clear DTCs
NEXT
  1. CHECK DTC*

(a) Check for DTCs.

Body Electrical > SRS Airbag > Trouble Codes

HINT:

Record or print DTCs if necessary.

OK:

DTCs are not output.

NG

GO TO DIAGNOSTIC TROUBLE CODE CHART

OK
  1. CHECK VEHICLE CONTROL HISTORY*

(a) Check for vehicle control history.

Body Electrical > SRS Airbag > Utility

Vehicle Control History (RoB)

Result

Proceed to

Vehicle control history is not output

A

Vehicle control history is output

B

A

GO TO PROBLEM SYMPTOMS TABLE

B
  1. CLEAR VEHICLE CONTROL HISTORY*

NOTICE:

Make sure to record any output Freeze Frame Data and Vehicle Control History (RoB) codes before clearing them and checking the DTC again.

(a) Clear the vehicle control history.

Body Electrical > SRS Airbag > Utility

Vehicle Control History (RoB)

NEXT
  1. CHECK VEHICLE CONTROL HISTORY*

(a) Check for vehicle control history.

Body Electrical > SRS Airbag > Utility

Vehicle Control History (RoB)

Result

Proceed to

Vehicle control history is not output

A

Vehicle control history is output

B

A

USE SIMULATION METHOD TO CHECK

B

GO TO VEHICLE CONTROL HISTORY