Vehicle Interior

Vehicle Control History

~1min read

VEHICLE CONTROL HISTORY

NOTICE:

  • Replacing or repairing related components may cause vehicle control history codes to be stored.
  • When checking the vehicle control history, make sure to record the output histories. Then, clear the histories and recheck the output histories again.

CHECK VEHICLE CONTROL HISTORY (OCCUPANT CLASSIFICATION SYSTEM)

(a) Following the instructions on the GTS, display the vehicle control history (RoB) check screen and read the codes.

Body Electrical > SRS Airbag > Utility

Vehicle Control History (RoB)

Vehicle Control History Item (Occupant Classification System)

Warning Light

Code

Tester Display

Measurement Item

Diagnostic Note

SRS warning light illuminated

X204A

Acceleration Sensor Malfunction

Recorded when airbag ECU assembly received a malfunction signal of acceleration sensor output from skid control ECU (brake actuator assembly).

  • for HEV Model:

    Click here

  • for Gasoline Model:

    Click here

SRS warning light illuminated

X20AF

Guess Vehicle Speed Malfunction

Recorded when a guess vehicle speed malfunction signal (invalid value) is received from skid control ECU (brake actuator assembly).

  • for HEV Model:

    Click here

  • for Gasoline Model:

    Click here

-

X20D0

Zero Point Calibration of Occupant Detection Load Sensor Undone

Recorded when occupant classification zero point calibration is not performed or could not be completed normally.

Click here

SRS warning light illuminated

X210B

SRS Airbag ECU IG Voltage Drop

Recorded when the airbag ECU assembly input voltage is continuously less than 8 V for 60 seconds.

Click here

CLEAR VEHICLE CONTROL HISTORY (OCCUPANT CLASSIFICATION SYSTEM)

(a) Select the deletion button on the vehicle control history (RoB) check screen and clear the codes.

Body Electrical > SRS Airbag > Utility

Vehicle Control History (RoB)