Engine & Hybrid System
Inspection
In this manual: Engine & Hybrid System
~1min read
INSPECTION
PROCEDURE
1. INSPECT OIL PRESSURE CONTROL VALVE ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the oil pressure control valve assembly. |
|
(b) Connect a battery positive (+) lead to terminal 1 and a negative (-) lead to terminal 2. Check that a clicking sound is heard from the oil pressure control valve assembly. NOTICE:
If the result is not as specified, replace the oil pressure control valve assembly. |
|
Was this page helpful?

