Engine & Hybrid System
Removal
In this manual: Engine & Hybrid System
~1min read
REMOVAL
COMPONENTS (REMOVAL)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
REAR ENGINE UNDER COVER RH |
51443C |
- |
- |
- |
2 |
OIL PRESSURE CONTROL VALVE ASSEMBLY |
15250 |
- |
- |
|
NOTICE:
This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
![]()
PROCEDURE
1. REMOVE REAR ENGINE UNDER COVER RH
Click here ![]()
2. REMOVE OIL PRESSURE CONTROL VALVE ASSEMBLY
(1) Disconnect the oil pressure control valve assembly connector.
(2) Using an 8 mm socket wrench, remove the bolt and oil pressure control valve assembly from the No. 2 timing chain cover assembly.
Was this page helpful?
.png)
.png)
.png)
.gif)