Vehicle Exterior

Inspection

~2min read

INSPECTION

PROCEDURE

1. INSPECT OUTER MIRROR LH

(a) Check the operation of the mirror heater.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

25 °C

3.57 to 4.83 Ω

If the result is not as specified, replace the outer mirror LH.

*a

Component without harness connected

(Outer Mirror LH)

(b) Check the operation of the outer rear view mirror indicator. (w/ Blind Spot Monitor System)

(1) Connect 4 new 1.5 V dry-cell batteries in series.

(2) Apply 6 V dry-cell batteries to the terminals of the connector, and check the blind spot monitor indicator condition.

NOTICE:

Do not apply a voltage of more than 6 V.

OK:

Battery Connection

Specified Condition

1 - Positive (+) end of the 6 V dry-cell battery

2 - Negative (-) end of the 6 V dry-cell battery

Blind spot monitor indicator comes on

If the result is not as specified, replace the outer mirror LH.

*a

Component without harness connected

(Outer Mirror LH)

2. INSPECT OUTER MIRROR RH

(a) Check the operation of the mirror heater.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

25 °C

3.57 to 4.83 Ω

If the result is not as specified, replace the outer mirror RH.

*a

Component without harness connected

(Outer Mirror RH)

(b) Check the operation of the outer rear view mirror indicator. (w/ Blind Spot Monitor System)

(1) Connect 4 new 1.5 V dry-cell batteries in series.

(2) Apply 6 V dry-cell batteries to the terminals of the connector, and check the blind spot monitor indicator condition.

NOTICE:

Do not apply a voltage of more than 6 V.

OK:

Battery Connection

Specified Condition

1 - Positive (+) end of the 6 V dry-cell battery

2 - Negative (-) end of the 6 V dry-cell battery

Blind spot monitor indicator comes on

If the result is not as specified, replace the outer mirror RH.

*a

Component without harness connected

(Outer Mirror RH)