Vehicle Exterior

Removal

~1min read

REMOVAL

COMPONENTS (REMOVAL)

Procedure

Part Name Code

1

OUTER MIRROR

87961

-

-

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE OUTER MIRROR

*A

w/ Blind Spot Monitor System

-

-

(1) Apply protective tape to the area as shown in the illustration.

(2) Push the upper part of the mirror surface and tilt it.

NOTICE:

Do not push the outer mirror with excessive force. Doing so may cause the actuator to come off or break the mirror surface.

(3) Using a moulding remover D, disengage the claws on the lower part of the outer mirror.

(4) Push the lower part of the mirror surface and tilt it.

NOTICE:

Do not push the outer mirror with excessive force. Doing so may cause the actuator to come off or break the mirror surface.

(5) Using a moulding remover D, disengage the claws on the upper part of the outer mirror to remove the outer mirror.

(6) Disconnect the 2 connectors.

(7) w/ Blind Spot Monitor System:

1. Disconnect the connector.