Vehicle Exterior
Inspection
INSPECTION
PROCEDURE
1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
HINT:
This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly.
(a) Fill the windshield washer jar assembly with washer fluid.
(b) Check that washer fluid flows from the windshield washer jar assembly.
OK: Front Washer
Auxiliary Battery Connection | Specified Condition |
A35-1 (B) - Auxiliary battery positive (+)
A35-2 (SW) - Auxiliary battery negative (-) |
Washer fluid flows from the windshield washer jar assembly |
Rear Washer (w/ Rear Wiper)
Auxiliary Battery Connection | Specified Condition |
A35-2 (SW) - Auxiliary battery positive (+)
A35-1 (B) - Auxiliary battery negative (-) |
Washer fluid flows from the windshield washer jar assembly |
If the result is not as specified, replace the windshield washer motor and pump assembly. |
 |
*a |
Component without harness connected
(Windshield Washer Motor and Pump Assembly) |
|
|
Was this page helpful?