Vehicle Interior
Inspection
In this manual: Vehicle Interior
~1min read
INSPECTION
PROCEDURE
1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH
(a) Measure the resistance according to the value(s) in the table below.
*a |
Component without harness connected (Front Seat Cushion Heater Assembly LH) |
- |
- |
Standard Resistance:
Tester Connection | Condition | Specified Condition |
|---|---|---|
B-1 - q8-5 |
Seat heater temperature 20 °C |
2.9 to 3.4 Ω |
B-2 - q8-7 |
Seat heater temperature 20 °C |
1.6 to 1.9 Ω |
If the result is not as specified, replace the front seat cushion heater assembly LH.
Was this page helpful?