Vehicle Interior
Inspection
INSPECTION
PROCEDURE
1. INSPECT FRONT SEATBACK HEATER ASSEMBLY LH
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
F-1 - F-3 |
Seat heater temperature 20 °C |
3.3 to 4.0 Ω |
F-2 - F-3 |
Seat heater temperature 20 °C |
1.7 to 2.0 Ω |
If the result is not as specified, replace the front seatback heater assembly LH. |
 |
*a |
Component without harness connected
(Front Seatback Heater Assembly LH) |
|
|
2. INSPECT FRONT SEATBACK HEATER ASSEMBLY RH
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
G-1 - G-3 |
Seat heater temperature 20 °C |
3.3 to 4.0 Ω |
G-2 - G-3 |
Seat heater temperature 20 °C |
1.7 to 2.0 Ω |
If the result is not as specified, replace the front seatback heater assembly RH. |
 |
*a |
Component without harness connected
(Front Seatback Heater Assembly RH) |
|
|
Was this page helpful?