Engine & Hybrid System
Installation
In this manual: Engine & Hybrid System
~1min read
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
MASS AIR FLOW METER SUB-ASSEMBLY |
22204 |
- |
- |
|
2 |
PERFORM INITIALIZATION |
- |
- |
- |
|
PROCEDURE
1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY
![]() |
HINT: Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly. Click here |
(1) Install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.
NOTICE:
- If the mass air flow meter sub-assembly has been struck or dropped, replace it.
- If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.
- Make sure that the O-ring is not cracked or moved out of place when installing the mass air flow meter sub-assembly.
(2) Connect the mass air flow meter sub-assembly connector.
2. PERFORM INITIALIZATION
(a) Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.
Click here ![]()
Was this page helpful?
.png)
.png)
.png)
.gif)