Installation
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
NO. 1 ECM BRACKET |
89667E |
- |
- |
- |
2 |
NO. 2 ECM BRACKET |
89668 |
- |
- |
- |
3 |
ECM |
89661 |
- |
- |
|
4 |
ENGINE WIRE |
82121 |
- |
- |
|
5 |
CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL |
- |
- |
- |
- |
6 |
VEHICLE IDENTIFICATION NUMBER (VIN) OR FRAME NUMBER REGISTRATION |
- |
- |
- |
|
7 |
ECU CONFIGURATION |
- |
- |
- |
|
8 |
UPDATE ECU SECURITY KEY |
- |
- |
- |
|
9 |
PERFORM INITIALIZATION |
- |
- |
- |
|
10 |
PERFORM INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL |
- |
- |
- |
|
![]() |
N*m (kgf*cm, ft.*lbf): Specified torque |
- |
- |
NOTICE:
- After replacing the ECM, make sure to perform vehicle identification number (vin) or frame number registration, ECU configuration and update ECU security key.
- After performing the perform vehicle identification number (vin) or frame number registration, ECU configuration procedure and update ECU security key procedure, make sure to perform the initialization procedure for when the cable has been disconnected and reconnected to the negative (-) auxiliary battery terminal.
PROCEDURE
1. INSTALL NO. 1 ECM BRACKET
Torque:
4,5 N·m {46 kgf·cm, 40 in·lbf}
2. INSTALL NO. 2 ECM BRACKET
Torque:
4,5 N·m {46 kgf·cm, 40 in·lbf}
3. INSTALL ECM
![]() |
NOTICE: If the ECM has been struck or dropped, replace it. |
Torque:
8 N·m {82 kgf·cm, 71 in·lbf}
4. INSTALL ENGINE WIRE
(1) Engage the clamp.
(2) Connect the 2 ECM connectors and lower the 2 lock levers.
NOTICE:
- When connecting the ECM connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the ECM connectors.
- Be sure to securely connect the ECM connectors.
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Click here ![]()
6. VEHICLE IDENTIFICATION NUMBER (VIN) OR FRAME NUMBER REGISTRATION
Click here ![]()
7. ECU CONFIGURATION
Click here ![]()
8. UPDATE ECU SECURITY KEY
Click here ![]()
9. PERFORM INITIALIZATION
Click here ![]()
10. PERFORM INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
HINT:
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click here ![]()
.png)
.png)
.png)
.gif)
.png)