Vehicle Interior

Installation

~1min read
010203040507.56N·mlb·ft
Tightening torque found on this page

INSTALLATION

COMPONENTS (INSTALLATION)

Procedure

Part Name Code

1

BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY

69350P

-

-

2

BACK DOOR TRIM PANEL ASSEMBLY

64780A

-

-

-

3

BACK DOOR SIDE GARNISH RH

67937B

-

-

-

4

BACK DOOR SIDE GARNISH LH

67938A

-

-

-

5

BACK DOOR UPPER PANEL TRIM ASSEMBLY

64790B

-

-

-

*A

w/ Power Back Door

*B

w/o Power Back Door

N*m (kgf*cm, ft.*lbf): Specified torque

MP grease

PROCEDURE

1. INSTALL BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY

HINT:

Make sure to remove the string before installing a new back door lock with courtesy light switch assembly.

(a) w/ Power Back Door:

MP Grease

-

-

(1) Apply MP grease to the sliding parts of the back door lock with courtesy light switch assembly.

(2) Install the back door lock with courtesy light switch assembly with the 4 bolts.

Torque:

7,5 N·m {76 kgf·cm, 66 in·lbf}

(3) Connect the 2 connectors.

(b) w/o Power Back Door:

MP Grease

-

-

(1) Apply MP grease to the sliding parts of the back door lock with courtesy light switch assembly.

(2) Install the back door lock with courtesy light switch assembly with the 3 bolts.

Torque:

7,5 N·m {76 kgf·cm, 66 in·lbf}

(3) Connect the connector.

2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY

3. INSTALL BACK DOOR SIDE GARNISH RH

4. INSTALL BACK DOOR SIDE GARNISH LH

5. INSTALL BACK DOOR UPPER PANEL TRIM ASSEMBLY