Vehicle Exterior

On-vehicle Inspection

~1min read

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY

(a) for LH Side:

(1) Operate the windshield wiper motor assembly.

(2) Stop the windshield wiper motor assembly operation.

(3) Check the automatic stop (park) position.

HINT:

After the windshield wiper motor assembly is stopped, check the automatic stop position after lifting the wiper blade 2 times.

Standard Clearance:

Area

Measurement

A

10 mm (0.394 in.)

OK:

The wiper blade stops at the position shown in the illustration.

*a

Alignment Mark

(b) for RH Side:

(1) Operate the windshield wiper motor assembly.

(2) Stop the windshield wiper motor assembly operation.

(3) Check the automatic stop (park) position.

HINT:

After the windshield wiper motor assembly is stopped, check the automatic stop position after lifting the wiper blade 2 times.

Standard Clearance:

Area

Measurement

A

10 mm (0.394 in.)

OK:

The wiper blade stops at the position shown in the illustration.

*a

Alignment Mark