Operation Check
OPERATION CHECK
CHECK THERMOSTAT IN FRONT SEAT CUSHION HEATER ASSEMBLY LH
(a) Remove the front seat cushion heater assembly LH.
- for Manual Seat:
Click here
.gif)
- for Power Seat:
Click here
.gif)
(b) Remove the front seatback heater assembly LH.
- for Manual Seat:
Click here
.gif)
- for Power Seat:
Click here
.gif)
(c) Connect the B front seat cushion heater assembly LH connector and F front seatback heater assembly LH connector.
*a |
Component without harness connected (Front Seat Cushion Heater Assembly LH) |
*b |
Component without harness connected (Front Seatback Heater Assembly LH) |
(d) Apply auxiliary battery voltage and check the operation of the front seat heater according to the table below.
NOTICE:
To prevent the front seat heater from overheating, be sure to disconnect the auxiliary battery from the front seat heater immediately after this inspection is completed.
OK:
Auxiliary battery Connection | Specified Condition |
|---|---|
Auxiliary battery positive (+) → Terminal q8-1 |
|
Auxiliary battery negative (-) → Terminal q8-2 and q8-3 |
CHECK THERMOSTAT IN FRONT SEAT CUSHION HEATER ASSEMBLY RH
(a) Remove the front seat cushion heater assembly RH.
Click here
![]()
(b) Remove the front seatback heater assembly RH.
Click here
![]()
(c) Connect the C front seat cushion heater assembly RH connector and G front seatback heater assembly RH connector.
*a |
Component without harness connected (Front Seat Cushion Heater Assembly RH) |
*b |
Component without harness connected (Front Seatback Heater Assembly RH) |
(d) Apply auxiliary battery voltage and check the operation of the front seat heater according to the table below.
NOTICE:
To prevent the front seat heater from overheating, be sure to disconnect the auxiliary battery from the front seat heater immediately after this inspection is completed.
OK:
Auxiliary battery Connection | Specified Condition |
|---|---|
Auxiliary battery positive (+) → Terminal O196-6 |
|
Auxiliary battery negative (-) → Terminal O196-7 and O196-5 |