Be sure to read Precaution thoroughly before servicing.
Click here
Be sure to correctly follow the removal and installation procedures for the SRS parts.
NOTICE:
If there is any damage or deformation of airbag installation components or the areas they are installed to, do not attempt to repair them. Replace the damaged components with new ones.
CHECK SRS WARNING LIGHT
(a) Primary check
(1) Turn the ignition switch to ON and check that the SRS warning light turns on.
(2) Turn the ignition switch off. Wait for at least 2 seconds, then turn the ignition switch to ON. The SRS warning light comes on for approximately 6 seconds and diagnosis of the airbag system is performed.
HINT:
If the SRS warning light remains on for approximately 6 seconds or more after the ignition switch has been turned to ON, there may be a malfunction in the SRS airbag system.
If the SRS warning light occasionally turns on approximately 6 seconds or more after the ignition switch has been turned to ON, there may be a short to +B, short to ground or an open in the SRS warning light circuit.
If the SRS warning light illuminates after turning the ignition switch off or to ACC, there may be a malfunction in the power source circuit or combination meter assembly.
The SRS warning light turns off, and then turns on. This blinking pattern indicates a power source voltage drop. The SRS warning light turns off 6 to 10 seconds after the power source voltage returns to normal.
FUNCTION OF PASSENGER AIRBAG ON/OFF INDICATOR
(a) Initial check
(1) Turn the ignition switch to ON.
(2) The passenger airbag ON/OFF indicator comes on for approximately 4 seconds, then turns off for approximately 2 seconds.
(3) Approximately 6 seconds after the ignition switch is turned to ON, the passenger airbag ON/OFF indicator will indicate ON/OFF depending on the following conditions.
Indicator Operation
Front Passenger Seat Condition
Passenger Airbag ON/OFF Indicator
SRS Warning Light
ON Indicator
OFF Indicator
Vacant
OFF
ON
OFF
Adult*1 is seated
ON
OFF
OFF
Child*2 is seated
ON or OFF*2
OFF or ON*2
OFF
Child restraint system is installed
OFF
ON
OFF
Occupant classification system failure
OFF
ON
ON
*1: The system judges a person of average adult weight or more as an adult. If a smaller adult sits in the front passenger seat, the system may not recognize them as an adult depending on their physique and posture.
*2: The system may not recognize a child or a child in a child restraint system as a child depending on factors such as the positioning of the child restraint system or the child's physique or posture.
HINT:
The passenger airbag ON/OFF indicator illuminates based on the following timing chart in order to check the indicator light circuit.
When the occupant classification system is malfunctioning, both the SRS warning light and passenger airbag ON/OFF indicator ("OFF") come on. In this case, perform troubleshooting for the airbag system DTCs first.
INSPECT AIRBAG COMPONENTS
(a) Inspect the SRS parts in table below.
Component to Inspect
Procedure
Horn button assembly
Perform a diagnostic system check.
Visually check for defects with the horn button assembly installed to the vehicle.
HINT:
The defects are as follows:
Cuts on the surface or in the grooves
Small cracks on the surface or in the grooves
Significant discoloration on the surface or in the grooves
OK:
No defects are found.
If any defects are found, replace the horn button assembly with a new one.
Lower No. 1 instrument panel airbag assembly
Perform a diagnostic system check.
Visually check for defects with the lower No. 1 instrument panel airbag assembly installed to the vehicle.
HINT:
The defects are as follows:
Cuts
Small cracks
Significant discoloration
OK:
No defects are found.
If any defects are found, replace the lower No. 1 instrument panel airbag assembly with a new one.
Instrument panel passenger without door airbag assembly
Perform a diagnostic system check.
Visually check for defects with the instrument panel passenger without door airbag assembly installed to the vehicle.
HINT:
The defects are as follows:
Cuts on the instrument panel safety pad assembly around the instrument panel passenger without door airbag assembly
Small cracks on the instrument panel safety pad assembly around the instrument panel passenger without door airbag assembly
Significant discoloration on the instrument panel safety pad assembly around the instrument panel passenger without door airbag assembly
OK:
No defects are found.
If any defects are found, replace the instrument panel safety pad assembly with a new one.
Curtain shield airbag assembly
Perform a diagnostic system check.
Visually check for defects with the curtain shield airbag assemblies installed to the vehicle.
HINT:
The defects are as follows:
Cuts on each pillar garnish or the roof headlining assembly around the curtain shield airbag assemblies
Small cracks on each pillar garnish or the roof headlining assembly around the curtain shield airbag assemblies
Significant discoloration on each pillar garnish or the roof headlining assembly around the curtain shield airbag assemblies
OK:
No defects are found.
If any defects are found, replace each pillar garnish or the roof headlining assembly with a new one.
Front seat airbag assembly
Perform a diagnostic system check.
Visually check for defects with the front seat airbag assemblies installed to the vehicle.
HINT:
The defects are as follows:
Scratches, broken or frayed threads on the surface of the front seatback assembly around the front seat airbag assemblies
Small cracks on the front seatback assembly around the front seat airbag assemblies
Significant discoloration on the front seatback assembly around the front seat airbag assemblies
OK:
No defects are found.
If any defects are found, replace the front seatback pad with cover with a new one.
Rear seat airbag assembly
Perform a diagnostic system check.
Visually check for defects with the rear seat airbag assemblies installed to the vehicle.
HINT:
The defects are as follows:
Scratches, broken or frayed threads on the surface of the rear seatback assembly around the rear seat airbag assemblies
Small cracks in the rear seatback assembly around the rear seat airbag assemblies
Significant discoloration on the rear seatback assembly around the rear seat airbag assemblies
OK:
No defects are found.
If any defects are found, replace the bench type rear seatback pad or bench type rear seatback cover with a new one.
Front seat outer belt assembly
Perform a diagnostic system check.
Visually check for defects with the front seat outer belt assemblies installed to the vehicle.
HINT:
The defects are as follows:
Cuts
Small cracks
Significant discoloration
OK:
No defects are found.
If any defects are found, replace the front seat outer belt assembly with a new one.
Rear seat outer belt assembly
Perform a diagnostic system check.
Visually check for defects with the rear seat outer belt assemblies installed to the vehicle.
HINT:
The defects are as follows:
Cuts
Small cracks
Significant discoloration
OK:
No defects are found.
If any defects are found, replace the rear seat outer belt assembly with a new one.