Vehicle Interior
Utility
In this manual: Vehicle Interior
~1min read
UTILITY
WRITE VIN/VEHICLE IDENTIFICATION NUMBER
NOTICE:
- When the airbag sensor assembly is replaced, it is necessary to write the VIN/Vehicle Identification Number.
- Since the VIN information of the airbag sensor assembly is acquired via ECM, it is necessary to first write the VIN of ECM.
After writing ECM VIN information, first turn the ignition switch from off to ON and then write VIN information to the airbag sensor assembly.
- for M20A-FXS:
Click here
.gif)
- for M20A-FKS:
Click here
.gif)
- for M20A-FXS:
(a) Using the GTS, write the VIN/Vehicle Identification Number.
Body Electrical > SRS Airbag > UtilityVIN Memory
SWITCHING SPECIFICATION INFORMATION
NOTICE:
- When the airbag sensor assembly is replaced, it is necessary to switch the specification information.
- The airbag sensor assembly specification information is acquired from the forward recognition camera.
(a) Using the GTS, switch the specification information.
Body Electrical > SRS Airbag > UtilityLoad Specification Information
Was this page helpful?