Power Distribution Box System Internal Failure (B235504)
DESCRIPTION
This DTC is output when the semiconductor power integration ECU detects a load malfunction.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
B235504 |
Power Distribution Box System Internal Failure |
|
Power distribution box assembly |
WIRING DIAGRAM
NOTICE:
- When using the GTS with the ignition switch to off to troubleshoot:
Connect the GTS to the vehicle, and turn a courtesy switch on and off at 1.5 second intervals until communication between the GTS and vehicle begins.
- Inspect the fuses for circuits related to this system before performing the following procedure.
PROCEDURE
CONFIRM PROBLEM SYMPTOMS
(a) Check that no dependent system of the power distribution box assembly is malfunctioning.
HINT:
Refer to the link for dependent systems of the power distribution box assembly.
Click here ![]()
Result | Proceed to |
|---|---|
No dependent system of the power distribution box assembly is malfunctioning |
A |
A dependent system of the power distribution box assembly is malfunctioning |
B |
| A | GO TO STEP 3 |
|
INSPECT RELATED SYSTEMS
(a) Perform an inspection for each malfunctioning system by following "HOW TO PROCEED WITH TROUBLESHOOTING".
Result | Proceed to |
|---|---|
No related system is malfunctioning |
A |
A related system is malfunctioning |
B |
| B | REPAIR OR REPLACE MALFUNCTIONING COMPONENT |
|
CLEAR DTC
(a) Clear the DTCs.
Body Electrical > Power Distribution Box > Clear DTCs
|
CHECK FOR DTC
(a) Check for DTCs.
Body Electrical > Power Distribution Box > Trouble CodesResult | Proceed to |
|---|---|
B235504 is not output |
A |
B235504 is output |
B |
| A | REPLACE POWER DISTRIBUTION BOX ASSEMBLY |
| B | USE SIMULATION METHOD TO CHECK |