Engine & Hybrid System
Precaution
In this manual: Engine & Hybrid System
~1min read
PRECAUTION
WHEN USING GTS
CAUTION:
- Strictly obey all traffic rules and regulations.
- Do not drive the vehicle with the GTS cable contacting the pedals, shift lever or steering wheel.
Driving the vehicle with the GTS cable contacting these areas could impede vehicle control, resulting in a serious accident.- Do not operate the GTS while driving the vehicle.

- Operating the GTS while driving the vehicle will prevent you from paying sufficient attention to vehicle surroundings, and could result in a serious accident.
INITIALIZATION
NOTICE:
- Before replacing the ECM, refer to Registration.
Click here
.gif)
- Make sure to perform Reset Memory (CVT initialization), deceleration sensor zero point calibration and CVT oil pressure calibration when replacing the ECM or the oil pressure sensor.
for 2WD: Click here
.gif)
for AWD: Click here
.gif)
DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
NOTICE:
- After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
Click here
.gif)
- When disconnecting and reconnecting the auxiliary battery.
HINT:
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click here
.gif)
Was this page helpful?