Brake

Problem Symptoms Table

~2min read

PROBLEM SYMPTOMS TABLE

If DTCs are not output but the malfunction persists, use the following table to determine which circuits to inspect for each problem symptom.

HINT:

Refer to each inspection procedure for related problem symptoms.

Electronically Controlled Brake System

Symptom

Suspected Area

Link

ABS warning light abnormal (Remains on)

Refer to Vehicle Control History (RoB)

Refer to Meter / Gauge system

Brake system warning light (red indicator) abnormal (Remains on)

Refer to Vehicle Control History (RoB)

Refer to Meter / Gauge system

Brake system warning light (yellow indicator) abnormal (Remains on)

Refer to Vehicle Control History (RoB)

Refer to Meter / Gauge system

Brake hold standby indicator light abnormal

Refer to the procedure for "Brake Hold Standby Indicator Light Circuit"

Brake hold operated indicator light abnormal

Refer to Vehicle Control History (RoB)

Refer to the procedure for "Brake Hold Operated Indicator Light Circuit"

Slip indicator light abnormal

Refer to Vehicle Control History (RoB)

Refer to Meter / Gauge system

TRAC does not operate

Refer to the procedure for "TRAC does not Operate"

Excessive brake pedal travel (No fluid leaks and no air in system)

Refer to the procedure for "Excessive Brake Pedal Travel (No Fluid Leaks and No Air in System)"

ABS does not operate

Refer to the procedure for "ABS does not Operate"

ABS operates before necessary when braking

Refer to the procedure for "ABS Operates Before Necessary When Braking"

VSC does not operate or VSC does not operate correctly

Refer to the procedure for "VSC does not Operate or VSC does not Operate Correctly"

VSC OFF switch abnormal

Refer to the procedure for "VSC OFF Switch Circuit"

Meter buzzer abnormal

Refer to Meter / Gauge system