Audio & Visual & Telematics

Quarter Trim Speaker

~1min read
010203040508.56N·mlb·ft
Tightening torque found on this page

Removal

REMOVAL

COMPONENTS (REMOVAL)

Procedure

Part Name Code

1

DECK TRIM SIDE PANEL ASSEMBLY LH

64740C

-

-

-

2

NO. 1 SPEAKER ASSEMBLY WITH BOX

86150

-

-

-

PROCEDURE

1. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

Click here

2. REMOVE NO. 1 SPEAKER ASSEMBLY WITH BOX

Inspection

INSPECTION

PROCEDURE

1. INSPECT NO. 1 SPEAKER ASSEMBLY WITH BOX

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

O195-1 (WF2-) - O195-2 (WF2+)

Always

4.2 to 6.4 Ω

O195-3 (WF1-) - O195-4 (WF1+)

Always

4.2 to 6.4 Ω

If the result is not as specified, replace the No. 1 speaker assembly with box.

*a

Component without harness connected

(No. 1 Speaker Assembly with Box)

Installation

INSTALLATION

COMPONENTS (INSTALLATION)

Procedure

Part Name Code

1

NO. 1 SPEAKER ASSEMBLY WITH BOX

86150

-

-

2

DECK TRIM SIDE PANEL ASSEMBLY LH

64740C

-

-

-

N*m (kgf*cm, ft.*lbf): Specified torque

-

-

PROCEDURE

1. INSTALL NO. 1 SPEAKER ASSEMBLY WITH BOX

(1) Engage the guides to install the No. 1 speaker assembly with box.

(2) Install the 4 bolts in the order shown in the illustration.

Torque:

8,5 N·m {87 kgf·cm, 75 in·lbf}

(3) Connect the connector.

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

Click here