Vehicle Exterior

Reassembly

~2min read

REASSEMBLY

COMPONENTS (REASSEMBLY)

Procedure

Part Name Code

1

BACK DOOR OUTSIDE GARNISH PROTECTOR

76825

-

-

*1

BACK DOOR OUTSIDE GARNISH

-

-

●

Non-reusable part

-

-

PROCEDURE

1. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR

NOTICE:

When installing a new back door outside garnish protector, heat the back door outside garnish using a heat light.

Standard:

Item

Temperature

Back Door Outside Garnish

20 to 30 °C

CAUTION:

  • Do not touch the heat light and heated parts.
  • Touching the heat light may result in burns.
  • Touching heated parts for a long time may result in burns.

*a

Heated Part

*b

Heat Light

NOTICE:

Do not heat the back door outside garnish excessively.

*a

Location Line

-

-

(1) Clean the back door outside garnish.

1. Using a heat light, heat the back door outside garnish surface.

2. Remove any remaining double-sided tape from the back door outside garnish.

3. Wipe off any tape adhesive residue with cleaner.

NOTICE:

  • Installing the back door outside garnish protector with some double-sided tape remaining may cause poor adhesion. Perform this procedure until the tape is sufficiently removed.
  • Make sure to use a cloth when removing. Using a screwdriver, etc., may cause damage and poor adhesion.

(2) Install a new back door outside garnish protector.

1. Using a heat light, heat the back door outside garnish.

2. Remove the release paper from the back door outside garnish protector.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.

3. Install the back door outside garnish protector as shown in the illustration.

HINT:

  • Make sure that the end of the back door outside garnish protector is between the location lines.
  • Press the back door outside garnish protector firmly to install it.