Audio & Visual & Telematics
Remote Engine Starter does not Operate
In this manual: Audio & Visual & Telematics
~1min read
NOTICE:
Before replacing the certification ECU (smart key ECU assembly), refer to smart key system (for Entry Function) Precaution.
- for HEV Model:
Click here
.gif)
- for Gasoline Model:
Click here
.gif)
PROCEDURE
CHECK SMART KEY SYSTEM (for Start Function)
(a) Check that the engine can be started by pressing the ignition switch.
Result | Proceed to |
|---|---|
Engine can be started. |
A |
Engine cannot be started. |
B |
| B | GO TO SMART KEY SYSTEM (for Start Function)
|
|
REGISTRATION
HINT:
If registration is not performed after replacing any of the following parts, the remote engine start and stop will not be available.- Certification ECU (smart key ECU assembly)
- DCM (Telematics Transceiver)
(a) Perform remote engine start and stop registration.
- for HEV Model:
Click here
.gif)
- for Gasoline Model:
Click here
.gif)
(b) Check if the problem symptom recurs.
Result | Proceed to |
|---|---|
System does not return to normal. |
A |
System returns to normal. |
B |
| A | CONTACT TOYOTA CONNECT SUPPORT CENTER |
| B | END (COMMUNICATION ID REGISTRATION WAS NOT PERFORMED) |
Was this page helpful?