Removal
REMOVAL
COMPONENTS (REMOVAL)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
FRONT PILLAR UPPER COVER SUB-ASSEMBLY |
60118 |
- |
- |
|
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. REMOVE FRONT PILLAR UPPER COVER SUB-ASSEMBLY
![]() |
NOTICE: When removing the front pillar upper cover sub-assembly, if the double-sided tape is difficult to remove, heat the vehicle body and front pillar upper cover sub-assembly using a heat light. |
Standard:
Item | Temperature |
|---|---|
Vehicle Body |
40 to 60 °C |
Front Pillar Upper Cover Sub-assembly |
20 to 30 °C |
CAUTION:
- Do not touch the heat light and heated parts.
- Touching the heat light may result in burns.
- Touching heated parts for a long time may result in burns.
*a |
Heated Part |
*b |
Heat Light |
NOTICE:
Do not heat the vehicle body and front pillar upper cover sub-assembly excessively.
*a |
Double-sided Tape |
- |
- |
(1) Apply protective tape around the front pillar upper cover sub-assembly as shown in the illustration.
(2) Disengage the clips and separate the double-sided tape to remove the front pillar upper cover sub-assembly.
.png)
.png)
.png)
.gif)