Vehicle Exterior

Removal

~1min read

REMOVAL

COMPONENTS (REMOVAL)

Procedure

Part Name Code

1

STEERING WHEEL POSITION

-

-

-

2

LOWER STEERING COLUMN COVER

45287

-

-

3

UPPER STEERING COLUMN COVER

45286B

-

-

-

4

WINDSHIELD WIPER SWITCH ASSEMBLY

84650

-

-

PROCEDURE

1. ADJUST STEERING WHEEL POSITION

Lower

Extend

(1) Adjust steering wheel position by the below procedure.

1. Release the tilt and telescopic lever and fully extend and lower the steering column sub-assembly.

2. Lock the tilt and telescopic lever.

2. REMOVE LOWER STEERING COLUMN COVER

NOTICE:

Removing the lower steering column cover sub-assembly in the incorrect order will cause the parts to break.

Push Area

Push

(1) Turn the steering wheel assembly to the left to remove the screw.

(2) Turn the steering wheel assembly to the right to remove the screw.

(3) Remove the screw.

(4) Disengage the claws to remove the lower steering column cover as show in the illustration.

3. REMOVE UPPER STEERING COLUMN COVER

Remove in this Direction

-

-

4. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

Remove in this Direction

-

-

(1) Using a screwdriver with its tip wrapped with protective tape, disengage the claw to remove the windshield wiper switch assembly as shown in the illustration.

NOTICE:

If the claw is pulled with excessive force, it may break.