Shift Lever Knob
Removal
REMOVAL
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
SHIFT LEVER KNOB SUB-ASSEMBLY |
33504F |
- |
- |
|
PROCEDURE
1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
(1) Disengage the 2 claws to disconnect the shifting hole cover sub-assembly as shown in the illustration.
(2) Using a screwdriver with its tip wrapped with protective tape, expand the LH side clip and pull out the shift lever knob sub-assembly from the transmission floor shift assembly as shown in the illustration.
NOTICE:
Be careful not to damage the shift lever knob sub-assembly.
Installation
INSTALLATION
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
SHIFT LEVER KNOB SUB-ASSEMBLY |
33504F |
- |
- |
|
PROCEDURE
1. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
(1) Install the shift lever knob sub-assembly to the transmission floor shift assembly.
(2) Engage the 2 claws to connect the shifting hole cover sub-assembly.
NOTICE:
Make sure that the shifting hole cover sub-assembly does not twist after installing the shift lever knob sub-assembly.
.png)
.png)
.png)
.gif)
.png)
.png)
.png)
.gif)