Engine & Hybrid System

Vacuum Sensor

~1min read
0102030405054N·mlb·ft
Tightening torque found on this page

Removal

REMOVAL

COMPONENTS (REMOVAL)

Procedure

Part Name Code

1

VACUUM HOSE

-

-

-

-

2

E.F.I. VACUUM SENSOR ASSEMBLY (MANIFOLD ABSOLUTE PRESSURE SENSOR)

89421

-

-

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here

PROCEDURE

1. SEPARATE VACUUM HOSE

2. REMOVE E.F.I. VACUUM SENSOR ASSEMBLY (MANIFOLD ABSOLUTE PRESSURE SENSOR)

(1) Disconnect the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) connector.

(2) Using an 8 mm socket wrench, remove the bolt and E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) from the intake manifold.

Installation

INSTALLATION

COMPONENTS (INSTALLATION)

Procedure

Part Name Code

1

E.F.I. VACUUM SENSOR ASSEMBLY (MANIFOLD ABSOLUTE PRESSURE SENSOR)

89421

-

-

2

VACUUM HOSE

-

-

-

-

N*m (kgf*cm, ft.*lbf): Specified torque

-

-

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here

PROCEDURE

1. INSTALL E.F.I. VACUUM SENSOR ASSEMBLY (MANIFOLD ABSOLUTE PRESSURE SENSOR)

(1) Using an 8 mm socket wrench, install the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) to the intake manifold with the bolt.

Torque:

5 N·m {51 kgf·cm, 44 in·lbf}

(2) Connect the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) connector.

2. CONNECT VACUUM HOSE