Diagnostics

Inspection procedure

7steps
~42min
2/5difficulty
Done 0 of 7
1 Inspect transmission wire(sl)
Toyota Corolla. Inspect transmission wire
  1. Disconnect the transmission wire connector from the transaxle.
  2. measure the resistance according to the value(s) in the table below.

Standard:

2 Check harness and connector(transmission wire – ecm)
2 Check harness and connector(transmission wire – ecm)
Toyota Corolla. Check harness and connector
  1. Connect the transmission wire connector.
  2. disconnect the ecm connector.
  3. measure the resistance according to the value(s) in the table below.

Standard:

Replace ecm
Replace ecm 3 Inspect shift solenoid valve(sl)
Toyota Corolla. Inspect shift solenoid valve
  1. Remove the shift solenoid valve sl.
  2. measure the resistance according to the value(s) in the table below.

Standard:

  1. Connect the positive (+) battery lead to the solenoid connector terminal, and the negative (–) battery lead to the solenoid body for checking the solenoid valve operation.

Standard: the solenoid valve makes an operating noise.

Repair or replace transmission wire
Repair or replace transmission wire

Test yourself

A quick Toyota Corolla quiz: every answer comes with an explanation and a link to the manual page.